不銹鋼加工中遇到問題的解決辦法

前面有一篇文章我們講到了不銹鋼加工中注意事項，今天我們接著來分析和解決這個問題，其實不銹鋼加工的問題總結起來，不外乎就那么幾點：

1.加工的刀具和工件硬度之間的影響，如果到工件過硬，而刀具硬度不夠的話，就會導致刀具過度磨損，難以進行切削工作，這個時候，我們需要選擇具有高效熱傳遞的刀具，才減少刀具與工件之間的摩擦。

2.刀刃的切削塑性變化大導致磨損厲害，我們應當選擇鋒利的刀刃以及寬斷屑槽刃，來減少切削是的壓力，這樣既可以很好的控制切削的力度，又能很好的達到效果。

3.切削過程中的粉屑留在刀刃上，容易對工件表面磨損，致使表面不平整，在切削過程中，我們盡量選在有風力作用的條件下進行，風力可以吹走部分的粉屑，減少粉屑附著工件表面，減少摩擦。

 4.刀具的優與劣才是加工中至關主要的一點，不銹鋼刀具應當選擇刀具堅韌，韌度強的刀具，這樣獲得的加工結合力度也會比較高，得到的效果也會比較好。

       不銹鋼加工過程中，我們要有利的切削條件，選擇合適加工的刀具，進行不銹鋼加工工作，才能達到我們預想的效果，如果加工過程中，發生問題，靜下心來慢慢的想，不要過于著急，有疑問可以咨詢北京易德盛世科貿有限公司在線客服，我們竭誠為你服務。

Preceded by an article we talked about stainless steel processing considerations, and today we went to analyze and solve this problem, in fact, stainless steel processing problems sum up, no more than it so that:

1 processing between the tool and workpiece hardness of the impact, if the workpiece excellent and the tool hardness is not enough, it would lead to excessive wear of the tool, it is difficult for cutting work, this time, we need to choose a highly efficient heat transfer tool, it reduce the friction between the tool and the workpiece.

(2) changes in large plastic cutting blade causes wear badly, we should choose a sharp blade and a wide chipbreaker edge, to reduce the pressure of the cutting is, so that both can be well controlled cutting efforts, but also to achieve good results .

3 cutting process Fenxie stay in the blade, easy to wear and tear on the surface, resulting in an uneven surface, the cutting process, we try to choose where wind action conditions, the wind can blow away some of the fines, reduction of fines attached to the workpiece surface, to reduce friction.

  4 of superiority and inferiority tool is machining crucial main point, stainless steel knives should select the tool tough, toughness strong tool, machining combined efforts thus obtained will be relatively high, the resulting effect will be better.

        Stainless steel process, we want to favorable cutting conditions, select the appropriate processing tool for stainless steel processing work in order to achieve our desired results, and if the process, a problem occurs, stop and think slowly, do not be too anxious, there are questions you can consult Beijing Yi Electronics Co., Ltd. Tak Saatchi online customer service, we serve you.

新聞、技術文章、資料下載網站聲明
資料編輯人：admin
北京圣恩斯特
電話： 010-87607030

• 北京激光切割加工實現亮面切割的方法

  2024-01-10

• 北京激光切割加工不銹鋼與碳鋼的區別

  2024-01-10

• 北京激光切割覆膜金屬鈑材的技巧

  2024-01-10

• 激光切割不銹鋼鏤空多少錢

  2022-04-08

• 日本進口OTC焊接機器人已經到廠，歡迎下單

  2019-09-12